Grass Valley K2 Dyno PA Configuration Manual v.1.5 - Manual (Page 37)

4. Edit the FsNameServers file to add a line containing the IP address of the Control
network for each host name server. Do not include any loopback IP addresses in
this file.
5. On the Windows desktop right-click My Network Places and select Properties .
The Network Connections window opens.
6. On the menu bar at the top of the window, select Advanced , then Advanced
Settings …
7. On the Adapters and Bindings tab, order adapters as follows:
a) Control network
b) Media network
c) Loopback adapter
8. To close Advanced Settings and accept the changes, click OK .
9. Close the Network Properties window.
10. If you are using a standalone K2 Summit system with Dyno PA, proceed to
Configuring the DLC Server. If you are using a K2 Summit SAN system with Dyno
PA, proceed to About the K2 Dyno PA application and the Grass Valley platform
service.
Related Links
About configuring K2 Summit SAN systems on page 22
Configuring the standalone K2 Summit system and K2 Dyno PA on page 33
About standalone K2 Summit system and K2 Dyno PA DLC configuration on page 34
Configuring the DLC server
If configuring the DLC server on a standalone K2 Summit system with the DLC Tool,
refer to the following tasks:
• About the DLC Tool
• Installing the DLC Tool
• Configuring the DLC Server with the DLC Tool
If configuring the DLC server on a standalone K2 Summit system manually, without
the DLC Tool, refer to the following task:
• Configuring the DLC server manually
Related Links
Configuring the standalone K2 Summit system and K2 Dyno PA on page 33
About the DLC Tool on page 38
Installing the DLC Configuration Tool on page 38
Configuring the DLC server with the DLC Tool on page 38
Configuring the DLC server manually on page 40
15October 2010 K2 Dyno Production Assistant Configuration Manual version 1.5 37
Configuring the standalone K2 Summit system and K2 Dyno PA