Grass Valley Kalypso Emergency Bypass Option User Manual
Page 26
Advertising
26
Kalypso Emergency Bypass Option Instruction Manual
Maintenance
Rotary and Actuator Switches
The rotary switch sets a module operating mode, which is enacted by
moving the toggle switch either up or down. Rotary position 1 selects
shaped video for keying, position 2 selects unshaped video. The remaining
settings are for factory test and should not be used in the field.
Jumper Setting
The JP3 jumper needs to be bridged on the right (LOCAL) position
(
Figure 11
) for normal operation. All other jumpers are used for factory test
and should remain empty.
Advertising