Replacing components – England's Stove Works 25PAH User Manual

Page 37

Advertising
background image

37

IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING

CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.

ENGLAND’S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR

DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.

REPLACING COMPONENTS 

Glass 

This unit has one ceramic glass panel (Part No. AC‐G17) in the viewing door; self adhesive 

window gasket is included with replacement windows purchased directly from England’s Stove 
Works. Never replace ceramic glass with tempered or any other type of glass and never operate 
this unit with cracked or broken glass. 
Ceramic Glass Specifications 

 Glass Size: 16.50” x 9.25” 
 Glass Type: 5mm Ceramic Glass (Keralite Pyroceram) 
 Glass Manufacturer: Eurokera 

Glass Precautions 

1. Never replace ceramic glass with tempered or any other type of glass. 
2. Never operate this unit with cracked or broken glass. 
3. Do not slam the door or strike the glass with any objects. 

Glass Cleaning 

1. Be certain the stove and the glass are completely cool. 
2. The build‐up on the glass will generally be light and water is normally sufficient to 

remove the deposits.  If stubborn soot persists, use a cleaner made specifically for this 
purpose.  Do not scrape the glass or use abrasive cleaners. 

3. Rinse the glass with clean water and dry the glass before resuming normal operation. 

Glass Replacement 

1. Remove the door from the stove and rest it face down on a firm work surface. 
2. Using a 5/16” wrench, remove the eight (8) window bracket retaining screws. 
3. Remove the four (4) window brackets from the door.  Take extra care to avoid shards of 

glass if the glass window has been broken. 

4. Lift the old glass panel out of the door and discard. 
5. The new glass panel must be wrapped with 

a self‐adhesive fiberglass tape gasket (PU‐
GGK).  This gasket serves to cushion the 
glass from the cast iron door. 

6. Reinstall the window retaining brackets 

using the eight (8) screws previously 
removed.  Do not over‐tighten the screws. 

 

Retaining Screws 

Window Bracket

Glass Panel 

Glass Gasket

Advertising
This manual is related to the following products: