Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.06 - Manual (Page 49)

Chapter 3 Storage
48 Digital News Production
Viewing Controller Information
To view controller configuration information, choose Storage | RAID System
| Controller | Configure/Information . The Controller Configuration
Information window appears:
The table below describes the controller fields:
Field Description
ID Identification of the selected controller
State Enabled
Serial No: Controller ID
Number of Units There is only one unit
Number of Drives Number of drive
Max. Number of Drives Possible maximum number of drives
FW Revision Revision number of the controller firmware
HW Revision Revision number of the controller hardware
Rebuild/Verify Throttle The throttle determines which has a higher priority: the system or
the rebuild. Select the fastest I/O button to give the I/Os the highest
priority. Selecting a faster rebuild slows the performance of the
system.
Note: This command may be inaccessible while the fastest rebuild
option is in progress.