Grass Valley NewsBrowse Desktop Browsing System Installation v.2.7 - Manual (Page 24)

24 NewsBrowse Installation and Configuration Guide December 16, 2004
Chapter 2 Installing NewsBrowse
Router Gateway instructions
The NewsBrowse Router Gateway is the host platform for the Router Gateway
Service. The NewsBrowse system supports SMS7000 router control and Encore
router control via SMS7000 Native Protocol over Ethernet. This device is driven from
the Ingest Scheduling process on the NewsBrowse server. The Router Gateway lets
NewsBrowse schedule and control ingest services by communicating with your
existing router, allowing you to have more ingest feeds than NewsBrowse channels.
The Router Gateway provides the bridge between the NewsBrowse Network
environment and the Audio/Video Router Control environment.
The Router Gateway is an optional component of the NewsBrowse system. Systems
without a stand-alone Router Gateway platform can install the Router Gateway
software components on another NewsBrowse system platform, such as the MDI
server.
Platform Specifications:
• Pentium 3 1Ghz or better (1 or 2 CPU)
• 256 MB RAM
• CD-ROM Drive
• Minimum 20GB Program Drive
• Windows 2000 Workstation (SP3)
• .NET Framework 1.1
• Internet Explorer 6 (SP1)
• 100Tx LAN (x2)
Cable as illustrated and as follows:
• Connect an Ethernet cable from the LAN1 port on the Router Control Gateway to
the NewsBrowse network switch.
• Connect an Ethernet cable from the LAN2 port on the Router Gateway to the
network where the Router Control system can be accessed.
Power
LAN
VGA cable
to KVM
Keyboard/mouse
port to pigtail
to KVM
port 1
port 2
LAN