Grass Valley Newton Modular Control System v.2.0 - Manual (Page 19)

Newton Instruction Manual 19
NetConfig Application
Newton Panel Configurator Plug-In Tool
The Newton Panel Configurator in NetConfig ( Figure 4 ) is required for
panel configuration and is included on the CD. It provides an easy interface
for configuring a signal processing path—or channel—that includes an
individual module or a string of modules. Adjustable parameters or setups
can be defined for each channel. Each setup contains the assignments for
the four control knobs. Router sources can be associated with setups and
soft keys can be delegated to control router sources and destinations.
Configurable modules can be located on the network with NetConfig, then
dragged and dropped to the Newton Panel Configurator where specific
channels can be defined from the available parameters to provide any
number of setups for control with the four available knobs in each channel.
Figure 4. NetConfig with Newton Panel Configurator