Grass Valley Newton Modular Control System v.2.0 - Manual (Page 68)

68 Newton Instruction Manual
Section 3 — Configuration
Soft Keys – Setup Index Mode
When the Recall button on a panel is off, the soft keys act as setup index
keys. Each soft key corresponds to a index number in the Setup list in the
Newton Panel Configurator.
For example, we have created more setups in the Sat_4 channel. Each setup
corresponds to an index number as shown in
Figure 51 . When the panel is
in Setup Index mode ( Recall button off), selecting a soft key on the panel
will display the corresponding setup in the panel display. Up to twelve
setups can be created in a channel, corresponding to the twelve soft keys.
On the rack mount panel, the soft keys that have corresponding setups
created in the Newton Panel Configurator will be low tally, those with no
corresponding setup will be off. This allows the user to view all of the
setups created in a channel while at the panel. It also allows them to see
what setups have not been made (soft keys lamps with tally off).
Figure 51. Soft Key Setup Index Example
Soft keys correspond
to the index number
of each setup present
in a channel.