Grass Valley Newton Modular Control System v.2.0 - Manual (Page 45)

Newton Instruction Manual 45
Panel Configuration
To use the Newton Panel Configurator, open NetConfig and select the Con-
figure Newton Panels icon in the toolbar. This will bring up the Newton Panel
Configurator screen ( Figure 28 ).
De-select the icon to turn the Newton Panel Configurator off. If panels have
been configured previously, the last saved configuration will be loaded into
Newton Panel Configurator.
Note There are three different view settings available for the NetConfig toolbar:
Image and Text, Image Only, and Text Only. They are selected under the Con-
figure pulldown, NetConfig options, Configuration Options, Tool Bar.
Figure 28. Newton Panel Configurator Screen
Configure Newton Panels icon