Polaris 2016 Victory Cross Country - Manual (Page 145)

143
Cross Country MAGNUM Audio System
Voice Recognition Mode
The radio features voice recognition when a
driver headset is connected and turned on.
Radio Bluetooth functionality is dependent
on the capabilities of the device. Please see
your device’s user manual.
Tip: Make sure the Bluetooth volume on your
device is turned all the way up.
The device's signal and battery strength are
shown on the display with a range of zero to
five (0-5) with “5” representing maximum
strength.
Initiating a Phone Call
1. To initiate a phone call, double-press
to request voice recognition
mode.
2. Speak phone commands into the
microphone.
3. Press and release or press and
release while in voice recognition
mode to re-send or resume the voice
recognition request. When the phone
call is initiated, “DIALING” and either
the caller ID or “OUTGOING CALL”
will be displayed.
4. Press to cancel outgoing call if
desired. When the call is answered, the
screen will display “CONNECTED”.
5. Press and release to end the phone
call.
Error Messages
If voice command is initiated, but a device
is not paired to the Driver Device source,
“Driver Device Not Connected” displays.
If an outgoing call is made without a
headset, “Error No Headset” displays.