Polaris 2016 Victory Cross Country - Manual (Page 76)

74
Maintenance
Anti-Lock Brake System (ABS) Tone Ring/Sensor Inspection
1. Visually inspect for damaged teeth on
the front and rear ABS tone rings.
Inspect for nicks and dents on the face
of the teeth. The teeth edges should be
consistent in appearance. If a tone ring
is damaged, see your VICTORY
dealer for replacement as soon as
possible.
2. Inspect for debris adhering to the end
of the wheel speed sensors. If
contamination is observed, or if you
are unable to visually inspect, slide a
thin towel across the face of the sensor
between the sensor and the tone ring
to remove any potential debris.
Tires
Operating the motorcycle with improper tires or with improper or uneven tire pressure could cause loss
of control or accident. Always use the correct size and type of tires specified for your vehicle. Always
maintain proper tire pressure as recommended in the owner's manual and on safety labels.
Tire Condition
Inspect the tire sidewalls, road contact surface and tread base. If inspection reveals cuts,
punctures, cracks or other wear or damage, replace the tire before riding. Use only approved
replacement tires. See the VICTORY Service Manual or your authorized VICTORY dealer.
Tire Tread Depth
Use a depth gauge or an accurate ruler to measure the
depth of the center tire tread on both front and rear tires.
Replace the tire if the tread depth is less than 1/16 inch
(1.6 mm).
Tone Ring
Teeth
Wheel Speed
Sensor
WARNING