Polaris 2016 Victory Cross Country - Manual (Page 97)

95
Cleaning and Storage
Polishing the Motorcycle
Premium Polishing for Long-Lasting Protection
The premium method of polishing paint and chrome utilizes the latest in high-quality
polymer technology that provides the longest-lasting protection available in the polish
industry today. VICTORY Liquid Spray Wax for windshields, paint and chrome is
formulated for polishing after washing and can be sprayed on wet or dry surfaces. Liquid
Spray Wax quickly produces a durable, high-gloss shine with minimal effort. It contains NO
ABRASIVES and is clear coat-safe. It contains NO PETROLEUM DISTILLATES or
SILICONES.
1. Shake container well before use.
2. Begin by washing and rinsing the motorcycle.
3. Spray Liquid Spray Wax on a wet or dry bike, one section at a time. (For best results, the
bike’s surface should be cool.)
4. Wipe dry one section at a time with a VICTORY microfiber towel.
5. When finished drying, buff the entire motorcycle with a clean, dry microfiber towel for a
clean and luxurious shine.
Tip: Liquid Spray Wax can also be applied to clean and dry clear coats, windshields and chrome. Apply
to one section at a time and wipe dry. When finished, use a second towel to buff to a luxurious,
long-lasting shine.
Leather, Rubber and Vinyl Care
Never use a non-recommended protectant on seats, footrests, hand grips or tires. Slippery seats,
footrests or hand grips can cause loss of control. Slippery tires can cause loss of traction and loss of
control. Both situations could result in serious injury or death.
For the finest leather care, use Pure VICTORY Leather, Vinyl & Rubber Conditioner, a
unique, pleasantly scented formula of premium-quality polymers designed to restore luster
and softness to vinyl, leather and rubber without making them slippery. This conditioner is
available in the VICTORY Travel Kit.
This product is a true conditioner, not a coating. It does not close the pores of the surfaces but
penetrates, nourishes and softens the material. It protects against ultra violet (UV) rays and
cracking, repels water and prolongs the life and like-new appearance of the materials.
Applied to rubber, this product creates a water-repellent, like-new appearance. This product
can also be used to restore or maintain the factory finish on a VICTORY instrument panel/
dash and rear storage compartment black vinyl surfaces. Regular use increases soil
resistance.
1. Apply the product on a clean dry surface using a VICTORY microfiber towel.
2. Rub the product into the material. Repeat the treatment if the surface is extremely dry.
3. Wipe dry with a clean, dry microfiber towel to remove excess product. Buff lightly with
the towel for additional luster.
WARNING