Energizer MMT-511 - Manual (Page 131)

Troubleshooting & Care 119
Cleaning your pump
1. Use only a damp cloth and mild detergent mixed with water to
clean the outside of your pump.
2. After wiping down the pump rinse with clean water and dry
with a cloth.
3. Never use organic solvents, such as lighter fluid, nail polish
remover, or paint thinner to clean your pump.
4. Keep the reservoir compartment and battery compartment dry
and away from moisture.
5. Do not use any lubricants with your pump.
Storing your pump
If you have to remove and store your pump, it is recommended
that you store it with the battery in place. Keep a record of your
current basal rates. To preserve battery life, reset the basal rates to
zero, turn off RF Option, and set Auto-off to dashes or zeros.