Energizer MMT-511 - Manual (Page 94)

82 Chapter 7
■ You can review your past alarms in the alarm history screen.
■ Alarms result in closed circles on the screen.
■ Pressing any button will result in a display that explains the
alarm. Press the
button for instructions on responding to
the alarm.
Setting the alert type
Designates whether a “beep” or “vibration” will serve as the alarm
type for your pump. This screen also enables you to set the beep
volume level.
Vibrate mode will be disabled while you are using the Block feature.
Using the vibrate option uses more battery power than the audio
“beep” alarm and may shorten battery life. When you receive a
LOW BATTERY alert, your pump will revert to the beep alert to
conserve battery power.
Factory setting for the alert type is Beep Med.
1. From the HOME screen, press ACT. Press the button to
select Utilities. Press ACT.
MiniMed
MAIN MENU
Basal
Prime
Utilities