Lanner LEC-7950 - Manual (Page 12)

11
Board Layout
Chapter 3
Embedded and Industrial Computing
Connectors and Jumpers List
The tables below list the function of each of the board
jumpers and connectors by labels shown in the above
section. The next section in this chapter gives pin
definitions and instructions on setting jumpers.
Table 3.2 Connector List for LEB-7950 Board
Labels Function Pin Definition Reference
Page
CMOS1 Cleaning CMOS data including RTC P14
CN1 DC-in Connector P15
CN2 DIO Connector P15
CN3 COM1 P12
CN4 COM2 P12
DVID1 DVI-D Connector P15
FRONT1 Front Panel Function Pin Header P14
HDMI1 HDMI Port P15
J1 External Power Button P16
J2 Line-out (right) Connector P12
J3 Line-out (left) Connector P12
J4 Line-in (right) P12
J5 Line_in (left) P12
J6 Audio Connector P16
KBM1 Keyboard and Mouse P14
LAN1/LAN2 Ethernet Connector 1/Ethernet Connector 2 P15
LPC1 Low Pin Count Interface Reserved for factory use
MPCIE1 Mini-PCIe Connector (with SIM Card Reader) P16
MPCIE2 Half-size Mini-PCIe Connector P16
PBT1 Power Button Connector P15
SATA_PW1 SATA Power Connector P14
RST1 Reset Button P15
SATA1 Serial-ATA Connector P14
SIM1 SIM Card Reader P14
SPI1 Serial Peripheral Interface Bus Reserved for factory use
USB1/USB2/USB3 USB Type A Connector #0,1; #2,3; #4,5 P14
USB4 USB Pin Header P14
VGA1 VGA Port P15