Lanner LEC-7950 - Manual (Page 20)

19
Hardware Setup
Chapter 4
Embedded and Industrial Computing
Installing the Wireless 3G Module
Align the wireless module’s cutout with the Mini-PCIe 1.
slot notch.
Insert the wireless module into the connector
2.
diagonally.
Fasten the wireless module to the board with the
3.
screws (Use the Mini-PCIe module screws contained
within the package).
Installing the Wi-Fi Module
Follow the same steps as the Wireless 3G Module
Installation.
Installing 3G and Wi-Fi module on the PCIe socket
Wall Mounting
The product ships with wall mounting kit. To mount your
product on the wall, follow the instructions below:
First make a hole for the anchor in the surface on the 1.
wall.
Then press the anchor into the hole until it is flush with
2.
the surface. You may need a hammer to tap the wall
anchor.
Use a screwdriver to screw the threaded screw into the
3.
plastic anchor.
Attach the wall mounting bracket to the back of the
4.
device, securing it in place with four of the flat-head
screws provided.
Hang the device on the wall.
5.
Unit: mm
290