Logitek Electronic Systems ROC - Manual (Page 15)

Logitek ROC Reference Manual
Page 15
DATA
: Use a straight-through CAT-5 with RJ-45 connectors to connect the console to the JetStream
DSP card (Surface port) or Audio Engine AE-C6 card.
You can use a dedicated CAT5 patch cable or existing structured cabling. If using structured cabling
systems, care should be exercised to ensure the serial connections are not confused with other
network outlets and that the link is not unintentionally “un-patched”.
PSU
The ROC is powered by an external power supply, included with the console. Connect the supply
to mains using an IEC style inlet lead and the 12VDC to the rear of the ROC using the supplied DB-
9 to RJ-45 connection marked SURFACE.
DB-15 connectors are provided on the ROC Power Supply for GPI Input and Output connections.
A ground lug is provided on the chassis for your convenience.
Headphones
The ROC frame has a rear connection for Headphones input, which is internally wired to ¼”
(6.35mm) and 1/8” (3.5mm) headphone sockets at the front. This provides for convenient
headphone connection without the need to mount an in-desk or under-desk socket.
Connection from the ROC to JetStream Router is via a straight-through patch cable to a JetStream
JSM-AOUT-RJ analog output card, which is suitable for driving headphones directly.
If connecting to a JSM-AOUT-DB card or an Audio Engine IO24A card, wiring is to the
StudioHUB+ standard.
 See Appendix C for connector pinouts.