DJI Mavic Pro User Manual
Page 29
Aircraft
Mavic Pro
User Manual
©
2016 DJI All Rights Reserved.
29
Charger
Intelligent Flight Battery
Power Outlet
Battery Level Indicators While Charging
LED1
LED2
LED3
LED4
Battery Level
0%~25%
25%~50%
50%~75%
75%~100%
Fully Charged
Battery Protection LED Display
The table below shows battery protection mechanisms and corresponding LED patterns.
Battery Level Indicators while Charging
LED1 LED2 LED3 LED4 Blinking Pattern
Battery Protection Item
LED2 blinks twice per second
Over current detected
LED2 blinks three times per second Short circuit detected
LED3 blinks twice per second
Over charge detected
LED3 blinks three times per second Over-voltage charger detected
LED4 blinks twice per second
Charging temperature is too low
LED4 blinks three times per second Charging temperature is too high
Always turn off the battery before inserting it or removing it from the Mavic Pro. Never insert or
remove a battery when it is turned on.
After these issues are resolved, press the Power Button to turn off the Battery Level Indicator. Unplug the
Intelligent Flight Battery from the charger and plug it back in to resume charging. You do not need to un-
plug and plug in the charger in the event of a room temperature error; the charger will resume charging
when the temperature is within the allowable range.
DJI does not take any responsibility for damage caused by third-party chargers.
How to discharge the Intelligent Flight Battery before transport the batteries for long trip:
Fly the Mavic Pro outdoors until there is less than 20% of power left, or until the battery can no
longer be turned on.