Casio YC-430 - Manual (Page 24)

Setting Up the Multi PJ Camera System
E-24
Mounting the PJ Camera onto the PJ Camera Stand
1.
Make sure the PJ Camera is turned off.
2.
Attach the camera bracket to the bottom of the PJ Camera.
z Use a coin or some similar object to securely tighten the camera bracket screw.
3.
Attach the PJ Camera to the PJ Camera Stand camera holder.
z Make sure the lens side of the camera is facing downwards, towards the document stage.
z Press the PJ Camera against the camera holder until it clicks securely into place.
z Insert the PJ Camera strap into the strap holder.
z Make sure the PJ Camera is
attached securely to the camera
holder. Incorrectly attaching the
camera can cause it to fall,
resulting in damage and
malfunction.