Casio YC-430 - Manual (Page 8)

Operating Precautions
E-8
PJ Camera Software has two startup modes: Multi PJ and Business Document. Note the following
precautions whenever starting up in the Multi PJ startup mode.
z
The table below shows the recommended setup for each type of subject recorded in the
Document Camera Mode and Scanner Mode.
* The initial default setup is the one shown for “A4 (210 × 297mm) (8.3 × 11.7inch)
Document”.
ON : Recording condition setting on (button depressed)
OFF : Recording condition setting off
–
: Recording condition setting not available (dimmed)
If you cannot achieve proper recording while is turned on, try turning off.
z When performing a Board Area Capture operation, adjust the zoom setting so the board fills the
camera’s field of view.
z When performing a Projection Area Capture operation, adjust the zoom setting so the projected
image fills the camera’s field of view.
z All of the images in PJ Camera memory when you created a Camera Image Mode playlist must
be present in PJ Camera memory for the playlist to operate correctly. This is true even if the
deleted image is not included in the playlist. If one or more image has been deleted from PJ
Camera memory, question marks(?) will appear in place of some image thumbnails in the
playlist. If this happens, make a new Camera Image Mode playlist.
Multi PJ Startup Mode Precautions
Operation Bar
Recording Condition
Settings
A4 (210
× 297mm)
(8.3
× 11.7inch) Document
ON OFF OFF
Newspaper OFF OFF OFF
Business Card ON ON OFF
Large Object – OFF ON
Small Object – ON ON
Subject
Recording Condition
Settings