Casio YC-430 User Manual
Page 7
E-7
Operating Precautions
z
If the Adjust Camera Position dialog box appears, adjust the position of the PJ Camera so the
cross mark on the document stage is within the yellow frame. When the cross is within the
yellow frame, the system will take over and adjust camera position automatically.
z
Never touch the PJ Camera or PJ Camera Stand while the automatic camera position
adjustment operation is being performed.
z
When placing a subject onto the document stage, position it so the cross mark of the document
stage is hidden from the camera.
z
To avoid problems with trapezoid correction, make sure that none of the edges of the document
run along the edges of the document stage. Also make sure that the edges of the document
do not run along any of the hinges of the document stage.
z
Set up the document stage so the PJ Camera Stand does not cast a shadow onto the subject
being recorded.
z
Use of the PJ Camera in an area where there are strong radio waves from a cell phone,
wireless device, or other source can cause static noise in recorded images. If this happens, use
the PJ Camera in a different location or eliminate the source of the radio waves.
Helpful Operation Hints
Use in an Area Subjected to Strong Radio Waves