5 connections – EverFocus EDR-1640 User Manual
Page 11
1
1.5 CONNECTIONS
Main switch: Power switch, below IEC socket for 100~240 VAC power source
EDR1640 back panel (EDR920 identical, 9 video inputs)
10
Video inputs:
EDR920:
VIDEO IN(1~9): BNC video inputs for 1 Vpp Composite video signals, automatic 75 Ohm
termination (high impedance switching upon loop-through output load)
EDR1640:
VIDEO IN (1~16): BNC video inputs for 1 Vpp Composite video signals, automatic 75 Ohm
termination (high impedance switching upon loop-through output load)
5
MAIN monitor: Main monitor for live and playback display and on-screen display
CALL monitor: CALL monitor output. Spotmonitor for full screen live display, sequence
mode and alarm camera switching
3
4
Audio inputs: Audio inputs 1 ~ 4
Audio output: Audio output
2
ALM-INPUT: 9 (EDR920) resp. 16 (EDR1640) alarm inputs for dry contacts,
programmable NO or NC in the menu.
ALM-OUTPUT: 4 x NO/NC alarm output relay
REC-IN:
Input contact for recording start, NO, for dry contacts
6
Alarm and control inputs / outputs (for connection assignment, refer to appendix C)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15