EverFocus EDR-1640 - Manual (Page 31)

(10) TIME ZONE:
Enter your local time zone (Germany, Austria, Switzerland: GMT+1).
ATTENTION: The correct entry is compulsory for NTP synchronisation.
(11) UPDATE INTERVAL: Time synchronisation interval
DAY MONTH WEEK
(8) TIME SYNCHRONISATION:
The DVR offers time synchronisation via NTP server.
ATTENTION: The synchronisation should be activated by selecting “ON” only after defining
the daylight saving time, time zone and NTP server IP address.
(9) TIME SERVER:
The NTP server time synchronisation requires a TCP/IP connection to this server. For
information about the required settings, please refer to “NETWORK” menu.
NTP server identification:
Time servers available on the internet can be identified as follows:
1. Connect your PC to the internet.
2. Open the “DOS prompt” (directory ACCESSORIES or path START>RUN>command)
3. Enter the command:" ping pool.ntp.org " (see screenshot)
4. If the connection is successful, the server IP address is displayed.
30