EverFocus EDR-1640 - Manual (Page 41)

(10) AREA SETUP
With activated motion detection, the sub menu for setting up detection areas can be
entered by pressing the SELECT key.
Use the DISPLAY key to show all function keys available for this menu at any time.
Active areas are shown in green.
Press the COPY key to start the selection.
Use the JOG to raise a window and use the
ENTER key to switch the jog direction
between vertical and horizontal .
Having selected the requested window, use
the SEARCH key to activate the selected
areas.
Use the PAUSE key to deactivate the
selected areas.
If several or combined detection areas are
required, this procedure kann be repeated
as often as necessary.
Press the MENU key to leave this sub menu.
ƒ
Moving test: The triggered areas are shown in red. Adjust the sensitivity settings if required.
ƒ
Delete all areas: Press the PLAY key to delete all areas.
ƒ
On-screen help menu (start with DISPLAY):
MENU
COPY
ENTER
SEARCH
PAUSE
- EXIT
- SELECT AREAS
- DIRECTION
- ACTIVATE AREAS
- DEACTIVATE AREAS
40
DISPLAY KEY FOR HELP
DISPLAY KEY FOR HELP