EverFocus EDR-1640 - Manual (Page 44)

(6) HTTP PORT: Default setting for this port is: 80. The port can be changed if necessary.
(7) CONTROL PORT: Default setting for this port is: 1600. The port can be changed if necessary.
(8) DATA PORT:
Default setting for this port is: 37260. The port can be changed if necessary.
ATTENTION: If several users simultaneously access the DVR via network, each user
requires a DATA PORT (max. 4 users). Upon activating ports, e.g. in firewalls,
the following ports have to be opened additionally:
DATA PORT +1
DATA PORT +2
DATA PORT +3
Example: Dataport 37260 > ports to be opened : 37260, 37261, 37262, 37263
(9) MAC ADDR: Display of network interface MAC address (cannot be changed).
Having installed the optionally available PowerCon software, the DVR can transmit a network alarm to
up to 3 recipiants in case of event.
(1) PROTOCOL: Network alarm transmission protocol type
TCP: TCP protocol transmission
UDP: UDP protocol transmission
(2) PORT : Network port through which the alarm is transmitted. This port must be set
at the client’s side (recipiant) correspondingly.
(3) UNIQUE ID: DVR ID number, used for identification by the recipiant’s software.
3.7.2 ALARM (Network alarm)
43
NETWORK SETUP MENU
CONFIG PROTOCOL UDP
ALARM PORT NUMBER 01600
EMAIL UNIQUE ID _ _ _ _ _ _ _ _ _
PASSWORD
SERVER1 192.168.001.122
SERVER2 192.168.001.123
SERVER3 192.168.001.124