Extron electronic Multi-Graphic Processor MGP 464 DI - Manual (Page 61)

4-9
MGP 464 • Softwar
e Configuration and Contr
ol
PRELIMINARY
Command/response table for SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
Response
(processor to host)
Additional description
Input selection
Select an input X50) * X50@ ! Out X50@ • In X50) ] Set input source X50) to window X50@ .
View input X50@ ! X50) ] View the input channel for the selected window.
X50) = 1 through 19.
X50@ = 0 through 4; 0 = all windows.
Input video type
Set video type X50) * X50# \ X50) Typ X50# ] Set input X50) to format X50# .
View video type X50) \ X50# ] View video signal type for input X50) .
For X50# :
1 = RGB 5 = S-video
2 = YUV-HD 6 = Composite video
3 = RGBcvS 7 = DVI or HD-SDI
4 = YUVi
N It is recommended that virtual inputs be configured using the Windows-based control software. Refer to the software help file for the procedure.
DVI Input EDID/DDC
Set EDID information 41 * X50* * X51% # DDC X50* * X51% ] Set the DVI input EDID resolution to X50* and the
refresh rate to X51% .
X50* = the scaler resolution. For X50* :
1 = 640x480 11 = 1366x768
2 = 800x600 12 = 1365x1024
3 = 852x480 13 = 1400x1050
4 = 1024x768 14 = 1600x1200
5 = 1024x852 15 = 480p
6 = 1024x1024 16 = 576p
7 = 1280x768 17 = 720p
8 = 1280x1024 18 = 1080i
9 = 1360x765 19 = 1080p
10 = 1365x768
For
X51% :
1 = 50 Hz 5 = 100 Hz
2 = 60 Hz 6 = 120 Hz
3 = 72 Hz
4 = 96 Hz
N The default state is to match the output resolution: X50* = 0; X51% = 0.
View input 41# X50* * X51% ] View the DVI input EDID resolution/refresh rate.