Extron electronic Multi-Graphic Processor MGP 464 DI - Manual (Page 68)

SIS
™ Pr
ogramming and Contr
ol, cont’d
MGP 464 • Softwar
e Configuration and Contr
ol
4-16
PRELIMINARY
Command/response table for SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
Response
(processor to host)
Additional description
Input presets
Recall input preset 3 * X50@ * X51$ . Rpr 3 * X51$ ] Recall input preset X51$ to window X50@ .
X50@ = 0 through 4; 0 = all windows.
X51$ = 1 through 128.
Save input preset 3 * X50@ * X51$ , Spr 3 * X51$ ] Save the input settings for window X50@ to input
preset X51$ .
Input naming
Write input name E X50) , X50^ NI } Nmi X50) , X50^ ] Create a text label containing name X50^ for input
X50) .
X50) = 1 through 19.
X50^ = up to 16 characters. For X50^ , use:
Symbols: : / – _ + “ (space)
Numerals: 0 through 9
Letters: Lowercase a through z and
uppercase A through Z
Read input name E X50) NI } X50^ ] View contents of the name label for input X50) .
Window preset naming
N Window preset names cannot be viewed on the LCD screen. They can be viewed on the MGP 464 Web page, the Windows-based control software, or via SIS commands.
Write preset name E X51# , X50^ NP } Nmp X51# , X50^ ] Give the window preset X51# the name X50^ .
X51# = 1 through 128.
Read preset name E X51# NP } X50^ ] View window preset name X50^ .
Vertical start
Specific value X50) * X51@ ( Vst X50) * X51@ ] Set the vertical position of the first active pixel for
input
X50) to X51@ .
X51@ = 0 through 255; default = 128.
Increment vertical start value X50) + ( Vst X50) * X51@ ] Increase vertical start location value for input X50) .
Decrement vertical start value X50) – ( Vst X50) * X51@ ] Decrease vertical start location value for input
X50) .
View vertical start setting X50) ( X51@ ] View the vertical start location of the first active
pixel in the active window.