Extron electronic Multi-Graphic Processor MGP 464 DI - Manual (Page 79)

4-27
MGP 464 • Softwar
e Configuration and Contr
ol
PRELIMINARY
Command/response table for IP SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
URL Encoded (Web)
(host to processor)
Response
(Processor to host)
Additional description
Firmware version requests (continued)
Query updated firmware version 4Q 4Q X1! (plus web ver.-desc-UL date/time) ]
Use this command to find out which version
of the firmware, if any, was uploaded into the
unit after it left the factory.
X1! = firmware version to two decimal places.
With tagged response – verbose modes 2 and 3:
Ver04 *
X1! (plus web ver.-desc-UL date/time) ]
Example: 4Q Q 4Q 2.02 * (1.66–MGP464 Series –Mon, 14 Jan 2008 17:03:46 GMT
In this example, the factory firmware version
is 2.02, also known as kernel version 1.66, for
MGP 464, dated 14 January, 2008, at 5:03 and
46 seconds p.m., Greenwich mean time.
Information requests
Request unit part number N N 60-771-01 or 60-771-02 ]
Show unit part number.
MGP 464 is 60-771-01;
MGP 464 DI is 60-771-02.
With tagged response – verbose modes 2 and 3:
Pno 60-771-01/60-771-02
]
Request model name 1I 1I MGP 464 or MGP 464 DI Show unit model name.
With tagged response – verbose modes 2 and 3:
Inf01 * MGP 464 or Inf01 * MGP 464 DI
Request model description 2I 2I Four Window Multi-Graphic Processor
Show type of unit.
With tagged response – verbose modes 2 and 3:
Inf02 * Four Window Multi-Graphic Processor
Request system memory usage 3I 3I n bytes used out of n kBytes ]
Show amount of memory used and total
available memory for system operations.
With tagged response – verbose modes 2 and 3:
Inf03 * n bytes used out of n kBytes
]
Request user memory usage 4I 4I n bytes used out of n kBytes ]
Show amount of user memory used and total
available user memory.
With tagged response – verbose modes 2 and 3:
Inf04 * n bytes used out of n kBytes
]