Extron electronic Multi-Graphic Processor MGP 464 DI - Manual (Page 71)

4-19
MGP 464 • Softwar
e Configuration and Contr
ol
PRELIMINARY
Command/response table for SIS commands (continued)
Command
ASCII (Telnet)
(host to processor)
Response
(processor to host)
Additional description
Test pattern
Set test pattern X50$ J Tst X50$ ] Select test pattern X50$ . For X50$ :
0 = Off (none) 8 = Crop
1 = Colorbars 9 = Side By Side (4x3 crop)
2 = X-hatch (16x12) 10 = Quad Split (4x4)
3 = 4x4 H-hatch 11 = Pip Images (4x3 PIP col.)
4 = Grey scale 12 = 1.78 Aspect (4x3/16x9)
5 = Ramp 13 = 1.85 Aspect (4x3/16x9)
6 = Alt. pixels 14 = 2.35 Aspect (4x3/16x9)
7 = White field
View test pattern J X50$ ] View the currently selected test pattern.
Executive mode
Enable executive mode 1X Exe 1 ] Lock front panel control except for the input
buttons; allow RS-232/422 and Ethernet control.
Enable executive mode 2 2X Exe 2 ] Lock all front panel controls including input
buttons; allow RS-232/422 and Ethernet control.
Disable executive mode 0X Exe 0 ] Unlock all front panel controls.
View executive mode status X 0 ] / 1 ] / 2 ] View executive mode status.
Information requests
General information X50@ * I Chn X50) • Typ X50# • Std X50( • Blk X% ]
View input number, video signal type, input signal
standard, and blanking (muting) status in window
X50@ .
X50) = 1 through 19.
X50# = signal type. For X50# :
1 = RGB 5 = S-video
2 = YUV-HD 6 = Composite video
3 = RGBcvS 7 = DVI
4 = YUVi
X50( = signal standard. For X50( :
0 = None 4 = SECAM
1 = NTSC – = Not applicable
2 = PAL
X% = muting status. For X% :
1 = muted; 0 = unmuted