Extron electronic Multi-Graphic Processor MGP 464 DI - Manual (Page 92)

Software Configuration and Control, cont’d
MGP 464 • Software Configuration and Control 4-40
PRELIMINAR
Y
3 . On the selected tab, enter the information required for the type of
communication you chose.
• TCP/IP: Enter your MGP’s IP address, Telnet port (the default is 23), and
a password if desired.
• RS-232/422: Select your PC’s communication port from the Port menu,
and the baud rate from the Speed menu. All other parameters are preset.
4 . Click OK. After a few seconds, the MGP 464 main window opens.
MGP 464 window
5 . For information on configuring the MGP 464 using the Windows-based
software, refer to the program’s help file. To access the help file, select
Contents
from the Help pull-down menu, or press the F1 key.