Edirol PC-50 - Manual (Page 26)

26
Getting Connected and Installing Drivers (Windows)
Make the following settings so that you can use the MIDI functionality of the
PC-50. For details on connections, refer to
“Basic connections and MIDI
flow” (p. 38).
1
Open Control Panel .
Click the Windows Start menu, and from the menu that appears, select
Settings | Control Panel .
2
Open the Multimedia Properties dialog box.
In Control Panel , double-click the Multimedia icon to open the “Multimedia
Properties” dialog box.
3
Click the MIDI tab.
fig.98-E
4
Set “MIDI output.”
Select [Single instrument] , and select
the MIDI device from the list that
appears, and click
[Apply] .
If you want to use Media Player to play
a sound module connected to the PC-
50’s MIDI OUT connector, select
EDIROL PC-50 MIDI OUT .
5
Close the Multimedia Properties dialog box.
Click [OK] to complete the settings.
Windows 98 users
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PC-50 MIDI OUT
.
For details on the PC-50’s
output devices, refer to
“Input / output devices”
(p. 36).
This completes settings for using the PC-50 with an software that uses the standard Windows device
settings, such as Media Player.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PC-50’s output devices, refer to “Input / output devices” (p. 36).
PC-50_e.book 26 ページ ２００５年１１月１０日 木曜日 午前１０時３３分