Edirol PC-50 - Manual (Page 55)

55
Use MIDI functionality
Here’s how to set the voice mode of your connected MIDI sound module to Mono mode.
Mono mode allows you to play only single notes at a time.
fig.mono-1_80
fig.util*
1
Simultaneously hold the [MIDI CH] button and [PGM CHANGE]
button down.
The display will indicate “UTL,” and the PC-50 enters UTILITY
mode.
fig.mno
2
Press the [MONO] key.
The display will indicate “MNO” and blink.
fig.enter
3
Press the [ENTER] button.
* The setting will be cancelled if you press another button instead of the [ENTER]
button.
The mono mode on message has now been transmitted.
Transmitting a mono mode on message
2 1 3
PC-50_e.book 55 ページ ２００５年１１月１０日 木曜日 午前１０時３３分