Edirol PC-50 - Manual (Page 59)

59
Use MIDI functionality
ç
If notes on a connected MIDI sound module become “stuck,” or if there is something wrong with
the sound, you can execute the Panic function to solve the problem.
When you execute the Panic function,
All sounds off, All notes off, and Reset all controllers
messages will be transmitted on all channels.
fig.panic-1_80
fig.util*
1
Simultaneously hold the [MIDI CH] button and [PGM CHANGE]
button down.
The display will indicate “UTL,” and the PC-50 enters UTILITY
mode.
fig.pnc
2
Press the [PANIC] key.
The display will indicate “PNC” and blink.
fig.enter
3
Press the [ENTER] button.
* The setting will be cancelled if you press another button instead of the [ENTER]
button.
The reset message has now been transmitted.
Transmitting a reset message
2 1 3
PC-50_e.book 59 ページ ２００５年１１月１０日 木曜日 午前１０時３３分