Transmitting a program change message, P. 47, P. 47) – Edirol PC-50 User Manual
Page 47
Advertising
47
Use MIDI functionality
This lets you transmit a
program change message
fig.PC-1_75
fig.program
1
Press the
[PGM CHANGE]
button.
The [PGM CHANGE] button will light. The display will indicate the program
change that was transmitted most recently.
2
Use the
VALUE encoder
to specify the program change you want to transmit.
The
program change message
has now been transmitted.
In
CONTROLLER mode
(p. 50), pressing the [PGM CHANGE] button will transmit a Stop message (FCh).
Transmitting a program change message
Value range
1–128
PLAY
21
PC-50_e.book 47 ページ ２００５年１１月１０日 木曜日 午前１０時３３分
Advertising