Use midi functionality, How to switch modes, Play mode – Edirol PC-50 User Manual

Page 41: P. 41, What is play mode, Functions in play mode

Advertising
background image

41

Use MIDI functionality

What is PLAY mode?

This is the mode in which you play the PC-50.
In PLAY mode, playing the keyboard will transmit note messages to play the MIDI device.
In PLAY mode, you can play the keyboard to produce sound on a connected sound module, and
also use various other functions, such as operating the Pitch Bend/Modulation Lever to change the
pitch of the currently sounding note (Pitch Bend), adding vibrato (Modulation), or switching the
octave (Octave Shift).
In this mode you can also specify the MIDI transmit channel, and transmit program changes,
parameters, or start/stop messages.

To switch the PC-50 to PLAY mode...

When you turn on the power, the PC-50 will start up in PLAY mode.

fig.util

To switch the PC-50 to PLAY mode from UTILITY mode (p. 42), simultaneously
hold the

[MIDI CH]

button and

[PGM CHANGE]

button down or press

the

[CANCEL]

button.

• You are returned to PLAY mode once a setting or a process has been completed

within the UTILITY mode.

• You will also return to PLAY mode if you cancel an operation within UTILITY mode. In this

case, the setting you had been making will be discarded.

Functions in PLAY mode

How to switch modes

PLAY mode

Play

Transmit MIDI messages by playing the keyboard or operating the Pitch Bend/
Modulation Lever, VALUE encoder, hold pedal and expression pedal.

p. 43

Specify the MIDI transmit
channel

Set the transmit channel for the keyboard, Pitch Bend/Modulation Le-
ver, VALUE encoder, hold pedal and expression pedal.

p. 45

Transmit a Program
Change message

Transmit program change messages by operating the VALUE encoder.

For details on transmitting Bank Select, refer to p. 48 and p. 49.

p. 47

Start playback

If you’re in CONTROLLER mode (p. 50), pressing [MI-
DI CH] will transmit a Start (FAh) message.

p. 51

Stop playback

If you’re in CONTROLLER mode (p. 50), pressing
[PGM CHANGE] will transmit a Stop (FCh) message.

p. 52

Transmit the value of a
specific parameter

If you’re in CONTROLLER mode (p. 50), operating the
VALUE encoder will transmit the value of a specific
parameter.

p. 60

PLAY

PC-50_e.book 41 ページ 2005年11月10日 木曜日 午前10時33分

Advertising