Edirol PC-50 - Manual (Page 60)

60
Use MIDI functionality
If you’re in CONTROLLER mode (p. 50), operating the VALUE encoder will transmit the value of
a specific parameter.
fig.memory-1_80
fig.util
1
If you simultaneously press the [MIDI CH] button and the [PGM CHANGE] button,
the [MIDI CH] button and [PGM CHANGE] button will light, and the PC-50 will be
in CONTROLLER mode.
2
Operate the VALUE encoder .
The value of the parameter you assigned will be transmitted.
Transmitting the value of a specific parameter
PLAY CONTROLLER
■ Specified parameters
The PC-50 lets you assign a specific parameter to the VALUE encoder so that the value of that
parameter will be transmitted when you operate the VALUE encoder.
■ To assign a parameter
In UTILITY mode System settings, specify the parameter you want to assign to the VALUE encoder.
System settings (p. 61)
2 1
PC-50_e.book 60 ページ ２００５年１１月１０日 木曜日 午前１０時３３分