Edirol SD-80 - Manual (Page 15)

15
Basic operation
Basic operation
■ Adjusting the brightness of the display (Contrast)
Immediately after the power is turned on, or after the SD-80 has been used for an extended period, or
depending on the conditions in which it is placed, the characters or icons in the display screen may
become difficult to read. If this happens, you can adjust the contrast of the display.
fig.2-02
1. Press [SYSTEM] .
The button will light.
2. Press [PAGE ] or [PAGE ] until LCD Contrast is displayed.
3. Turn the [VALUE] dial to adjust the contrast of the display.
fig.2-03
LCD Contrast 1–4–5
Adjusts the contrast of the display.
4. Press [ENTER] . The contrast setting you specify will be remembered by the SD-80.
* Do not turn off the power while the setting is being stored (while “(TBD)” is displayed). Doing so will cause all data
stored in the SD-80 to be lost.
5. Press [INST] to return to the main screen.
4
1
2 3
5