Edirol SD-80 - Manual (Page 40)

40
Using the effects of the internal sound generator
Editing the sound generator effects
You can edit the sound generator effects when the sound generator mode is either GM2 mode or Native
mode.
fig.6-01b
1. Switch the sound generator to GM2 mode or Native mode. For details on switching the sound generator
mode, refer to "Switching the sound generator mode" (p. 22).
2. Press [EFFECT] . The sound generator Effect Edit screen will appear.
3. Press [PAGE ] or [PAGE ] to select the parameter that
you want to edit.
* MFX cannot be selected if the sound generator mode is GM2
mode .
4. Turn the [VALUE] dial to modify the value of the parameter you selected in step 4 . This completes the
steps needed to edit an effect parameter.
2
3 4