Sharing an mfx between multiple parts – Edirol SD-80 User Manual
Page 65
65
Controlling the SD-80 via MIDI
Controlling the
SD-80 via MIDI
Data:
00 (output assign = MFX)
Checksum (ss
): For details on the calculation method, refer to
“How to calculate the checksum”
in
“MIDI Implementation”
(MIDIImp_E.pdf) on the included CD-ROM.
fig.8-07_99
2.
Transmit “
Part Output MFX Select
” to specify the
MFX (MFX A–MFX C)
to which the output of the part
will be sent.
Address (pp):
when using the MFX for part 1 = 20
when using the MFX for part 2 = 21
:
when using the MFX for part 32 = 3F
Data (nn):
when the desired effect (MFX) is used by the enhanced sound of part 1 = 00 (MFX A)
when the desired effect (MFX) is used by the enhanced sound of part 2 = 01 (MFX B)
when the desired effect (MFX) is used by the enhanced sound of part 3 = 02 (MFX C)
<Example> Making the sound of part 6 use MFX C which is being used by the enhanced sound of part 3
Transmit the following system exclusive data.
1. F0 41 10 00 48 12 10 00 25 1F 00 2C F7
2. F0 41 10 00 48 12 10 00 25 20 02 29 F7
Sharing an MFX between multiple parts
Here’s how an MFX can be shared by more than one part.
*
When an MFX is shared by more than one part, the effect setting of the enhanced sound of the part using that MFX
will be ignored.
fig.8-08_99
1.
Make the
MFX
use the settings of the multitimbre
(common to all parts).
Address (mm):
when you want to use MFX A from multiple parts = 30
when you want to use MFX B from multiple parts = 31
when you want to use MFX C from multiple parts = 32
Data:
01 (MFX Source = COMMON)
Checksum (ss):
For details on the calculation method, refer to the section
“How to calculate the
checksum”
within
“MIDI Implementation”
(MIDIImp_E.pdf) on the included CD-
ROM.
fig.8-06_99
2.
Transmit
Output Assign = MFX
to specify
MFX
as the
output of the part.
Address (mm):
when you want part 1 to use the MFX = 20
when you want part 2 to use the MFX =21
:
when you want part 32 to use the MFX =3F
Data:
00 (Output Assign = MFX)
Checksum (ss):
For details on the calculation method, refer to
“How to calculate the checksum”
in
“MIDI Implementation”
(MIDIImp_E.pdf) on the included CD-ROM.
F0 41 10 00 48 12 [10 00 pp 20] [nn] [ss] F7
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Temporary
Multitimbre
Part
Part Output
MFX Select
F0 41 10 00 48 12 [10 00 00 mm] [01] [ss] F7
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Multitimbre
Common
MFX
Source
00
(=Common)
F0 41 10 00 48 12 [10 00 pp 1F] [00] [ss] F7
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
00 (=MFX)
Part
Output
Assign