Edirol SD-80 - Manual (Page 22)

22
Using the internal sound generator
Switching the sound generator mode
Here’s how to switch the sound generator mode. The sound generator mode can be switched from the
front panel, or by MIDI messages from an external device. Please be aware that the sound generator will
be initialized when you switch the sound generator mode.
fig.5-02
1. Press [SYSTEM] .
The button will light.
fig.7-01a_67.2
2. Press [PAGE ] or [PAGE ] until you have Inst Init
showing in the display.
3. Turn the [VALUE] dial to select the desired sound generator mode (GM2, Native, GS, XGlite).
fig.5-02a
4. Press [ENTER] . You will switch to the sound generator mode you selected in step 3 .
The front panel mode indicators show the current sound generator mode.
5. Press [INST] to return to the main screen.
4
1
2 3
5
Convenient functions
You can use the following shortcuts to switch the sound generator mode.
fig.5-01a
1. Hold down [SHIFT] and press the button for the desired sound generator
mode.
[INST] ............. GM2 ON (GM2 mode)
[EFFECTS] ..... NATIVE ON (Native mode)
[SYSTEM]....... GS RESET (GS mode)
2. The front panel mode indicators show the current sound generator mode.
1
1
2