Edirol SD-80 - Manual (Page 78)

78
Appendices
■ Effect parameter (Native mode)
Reverb (System Effect)
Parameter Value
Reverb Type Reverb Type 0(Off), 1(Reverb), 2(Room), 3(SRV Hall),
4(SRV Plate)(*1)
Reverb Level Reverb Level 0–127
(*1) When Reverb Type is set to 1 (Reverb)
Parameter Value
Type Reverb/Delay Type *2
Time Reverb/Delay Time 0–127
HF Damp Reverb/Delay HF Damp *3
Feedback Delay Feedback 0–127
*2: ROOM1, ROOM2, STAGE1, STAGE2, HALL1, HALL2, DELAY, PAN-DELAY
*3: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 Hz, BYPASS
(*1)When Reverb Type is 2 (Room), 3 (SRV Hall), or 4 (SRV Plate)
Parameter Value
Pre Delay Pre Delay Time 0.0–100 ms
Time Reverb Time 0–127
Size Size 1–8
High Cut High Cut Frequency *4
Density Reverb Density 0–127
Diffusion Reverb Diffusion 0–127
LF Damp Freq LF Damp Frequency *5
LF Damp Gain LF Damp Gain -36–0 dB
HF Damp Freq HF Damp Frequency *6
HF Damp Gain HF Damp Gain -36–0 dB
*4: 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12500 Hz, BYPASS
*5: 50, 64, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000 Hz
*6: 4000, 5000, 6400, 8000, 10000, 12500 Hz
Chorus (System Effect)
Parameter Value
Chorus Type Chorus Type 0(Off), 1(Chorus), 2(Delay)(*7)
Chorus Output Select Chorus Output Select MAIN, REV, MAIN+REV
Chorus Level Chorus Level 0–127
Chorus Parameter 1-12 Chorus Parameter 1-12
(*7)When Chorus Type is 1 (CHORUS)
Parameter Value
Rate Chorus Rate 0.05–10.00 Hz
Depth Chorus Depth 0–127
Feedback Chorus Feedback 0–127
Phase Phase 0–180 degrees
Pre Delay Chorus Pre Delay 0.0–100 ms
Type Filter Type OFF, LPF, HPF
Cutoff freq Cutoff Frequency *8
*8: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 Hz