Emerson Process Management MICRO MOTION 2400S - Manual (Page 88)

80 Micro Motion ® Model 2400S Transmitters for DeviceNet ™
Optional Configuration
8.14.2 Configuration procedure
Complete configuration instructions for the enhanced density application are provided in the manual
entitled Micro Motion Enhanced Density Application: Theory, Configuration, and Use. Because of the
complexity of this procedure, Micro Motion recommends using ProLink II for detailed configuration.
If it is necessary to use a DeviceNet tool, refer to the enhanced density manual for application
information, and to the manual entitled Micro Motion Model 2400S Transmitters for DeviceNet:
Device Profile for complete device profile information.
Basic information on setting up the enhanced density application using a DeviceNet tool is provided
in Figure 8-3.
Volume Conc (SG)
Volume concentration derived from specific
gravity
The percent volume of solute or of material
in suspension in the total solution, derived
from specific gravity ✓ ✓ ✓ ✓ ✓
Conc (Dens)
Concentration derived from reference
density
The mass, volume, weight, or number of
moles of solute or of material in
suspension in proportion to the total
solution, derived from reference density ✓ ✓ ✓
Conc (SG)
Concentration derived from specific gravity
The mass, volume, weight, or number of
moles of solute or of material in
suspension in proportion to the total
solution, derived from specific gravity
✓ ✓ ✓ ✓
Table 8-17 Derived variables and available process variables continued
Available process variables
Derived variable – ProLink II label
and definition
Density at
reference
temperature Standard
volume
flow rate Specific
gravity Concentration Net
mass
flow rate Net
volume
flow rate