Elmo Micro Video Camera System SUV-CAM - Manual (Page 23)

Preparations (Continued)
103
Removing the Camera Head
1
Remove the camera head.
Turn the screw lock of the head connector counterclockwise to remove the camera head, and attach the rubber cover.
Waterproof function of this recorder
The camera head section of this recorder is waterproof. Note with care that the recorder is NOT waterproof.
z
Waterproof performance: Corresponding to JIS Protection Class 8 (IP×8) with waterproof structure working up to 40m in water depth.
Camera head part:
Waterproof
Recorder part:
Non-waterproof
The recorder part is not waterproof structure. Do not soak
in water.
After using the camera head in the water (sea, river),
wash the camera head completely with fresh water. Then,
wipe water droplets off the camera head with a dry, soft
cloth, and dry the camera head completely in an airy,
shaded area.
When the lens is replaced or the focus is adjusted, check
the thread part and the O-ring for dirt, and the O-ring for
breaks, scrapes or cracks. These defects could cause a
water leak or failure.