Elmo Micro Video Camera System SUV-CAM - Manual (Page 8)

Introduction (Continued)
88
„ Do not handle the recorder or the camera head roughly.
„ When removing the battery, turn OFF the power supply to the recorder beforehand.
„ When carrying the recorder or the camera head, be sure hold the recorder and the camera securely.
„ When using the camera head or the recorder on your body, take care that the camera cable or the strap does not catch on anything.
„ Never operate or watch the display while driving a car or a bike, you could have an accident. When using the camera in your car or
on your body, pay attention to the traffic and road surface conditions around you to prevent any accident
.
„ This recorder is composed of precision electronic parts and components. If this recorder is handled as follows, the internal data could
be destroyed:
*
The battery is removed, the SD memory card is extracted or the USB cable is connected when the recorder is in operation.
* The USB cable or the AC adapter comes out during communication.
* Any other abnormal way of handling
„ If this recorder is disassembled or altered intentionally by the user, the recorder will no longer be qualified for free repair even if it is
within the warranty period.
„ Luminescent spot and black spot
This recorder uses a CCD area image sensor composed of numerous pixels, and some of the pixels may not operate normally.
Therefore, luminescent spots or black spots could be witnessed on the output screen. This is not a defect but a phenomenon
peculiar to the CCD area image sensor.