Elmo Micro Video Camera System SUV-CAM - Manual (Page 25)

105
Turn ON and Turn OFF the Power Supply
Turning ON the power supply
Before turning ON the power supply, be sure to load the SD memory card. (ÎP104)
1
Turn ON the power supply.
Press [POWER&HOLD] slide switch to the POWER side for approx. 2 seconds.
Then, the Startup screen appears on the LCD monitor.
※
When the power supply is being turned ON, do not operate any buttons.
Turning OFF the power supply
1
Turning OFF the power supply
Press [POWER&HOLD] slide switch to the POWER side for approx. 2 seconds.
Then, the power supply is turned OFF.
Do not turn OFF the power supply to the recorder during recording,
or the file under recording could be broken and unable to be played.
※ When turning ON the power
supply to the recorder for the first
time after the purchase, the
screen for setting the date and
time appears (ÎP107)
After turning ON the power
supply, do not operate any
buttons until the Playlist
screen appears, or the SD
memory card may not be
recognized normally.
Playlist screen
Power OFF Auto Power OFF Function
If no operation is made for approx.
5 minutes except the time when the
camera is recording or playing, the
power supply to the camera will be
turned OFF automatically to save
the battery life.