Elmo Micro Video Camera System SUV-CAM - Manual (Page 57)

Troubleshooting (Continued)
137
■ Shooting, video recording and audio recording
Symptom Cause Remedy
Is the SD memory card loaded? Load the SD memory card.(ÎP104)
Is the free space of the SD memory card
adequate? Delete some data from the SD memory card before
recording.(ÎP119)
Is the SD memory card locked? Release the lock of the SD memory card.
The video cannot be
recorded.
Is the camera head attached? Attach the camera head.(ÎP102)
The recording stops
suddenly
The SD memory card has no free space.
Depending on the card type or record mode (resolution, video
quality, frame rate), the recording may stop on the way due to the
lack of the SD memory card’s free.
Refer to P112 “Standard duration of recording” for before the
recording.
Is the camera cable length setting proper?
Adjust the camera setting to the cable length for the camera head
in use.(ÎP110, 111)
Is the camera head attached properly?
Attach the camera head properly to the recorder.
(ÎP102)
The video is not normal.
Is the video output system correct?
When connecting the external monitor, set the video output
system to that of your country/region.(ÎP123, 125)
The video is too bright or
too dark.
Is the exposure set properly?
Change the exposure set value in adjustment to the desired
brightness. (ÎP110, 111)
Is the recorder used near TV receiver or cellular
phone? Keep this recorder as far away as possible from TV receiver or
cellular phone.
The video in play is
accompanied by noise.
Is a dark place being shot?
This is not a failure.
To reduce the noise, sufficiently brighten the object.
The screen shimmers.
Is shooting made under the fluorescent
illumination with power supply frequency of
60Hz?
This is not a failure.
Avoid light from fluorescent lamps when shooting.