Elmo Micro Video Camera System SUV-CAM - Manual (Page 27)

107
Set the Date and Time
When the power supply to the recorder is turned ON for the first time after purchase, the Date and Time Setting screen appears.
Then, set the date and time according to the procedures below.
1
Move the cursor.
To move forward the cursor, press [ENTER]. To move backward the cursor,
press [MENU].
※
cursor moves forward in the following order:
Year Æ Month Æ Day Æ Hour Æ Minute Æ Second
2
Change the values.
Change the values by using [∧] or [∨]
3
Accept the values.
Press [REC] to fix the values.
●Now, the initial setting is completed, and the Playlist screen appears.
In any of the following events, the date and time setting is reset, so you must set the date and time again:
●The battery has been removed from the recorder.
●The recorder with the battery in has not been used for a long time.
●The battery has been discharged completely.
Cursor