Elmo Micro Video Camera System SUV-CAM - Manual (Page 60)

Troubleshooting (Continued)
140
■ Others
Symptom Cause Remedy
“Load the SD memory
card” appears.
The SD memory card is not loaded. Load the SD memory card.
“The SD memory card is
locked” appears.
Is the SD memory card locked? Release the lock of the SD memory card.
“The SD memory card has
not been formatted. Do you
want to format it now?”
appears.
The format system of the SD memory card is
wrong.
Format the SD memory card in the FAT16 file system.(ÎP127)
This is not a failure. To operate the button, release the setting to
“HOLD.” (ÎP106)
Each button does not
operate when pressed.
Is the switch set to “HOLD”?
If the switch is not set to “HOLD” but the button operation do not
work, press “RESET” to restart the unit forcibly.（ÎP96）
※
“RESET” has no function of returning the recorder to the
factory setting.
“Hold on” appears. Is the switch set to “HOLD”?
This is not a failure. To operate the button, release the setting to
“HOLD.” (ÎP106)
“This file cannot be played”
appears.
The file is corrupt. The file is corrupt and cannot be played. Delete the file.(ÎP119)
Upgrade is disabled. Is the upgrade file saving destination right?
Save the upgrade file in the right destination.
(ÎP128)