Extron electronic FOX 2G Tx - Manual (Page 35)

FOX 2G Tx/Rx AV • Configuration 3-7
X$
— Output video type
0 = Follow input type
6 = Component
7 = S-video
8 = Composite
X%
— Audio gain (0 to 10)
X^ — Audio attenuation (-18 to 0)
X&
— Audio level (-18 to +10)
X* — Audio output level
0 = Consumer level (-10 dBV) (default)
1 = Professional level (+4 dBu)
X(
— Test pattern
0 = Test pattern off
1 = Color bars
2 = Grayscale
3 = Alternating pixels
X1)
— Link #2 transmission status
0 = disables link #2
1 = enables link #2 from receiver back to transmitter
2 = enables daisy chain mode on receiver
X1!
— SM (single mode) or MM (multimode)
X1@
— Tx (transmitter) or Rx (receiver)
X1# — Memory presets (1 to 30)
X1$
— Internal temperature in degrees Fahrenheit and Celsius:
(xxxF xxC)
Error messages
E10 — Invalid command
E13 — Invalid parameter
E14 — Not valid for this configuration