Extron electronic FOX 2G Tx - Manual (Page 55)

FOX 2G Tx/Rx AV • Reference Information
Control/remote
Serial control ports on each unit (transmitter and receiver)
Control ................................ 1 RS-232, 3.5 mm captive screw connector,
5 pole (3 pins are used) (rear panel)
1 RS-232, 2.5 mm mini stereo jack (front
panel)
Pass-through ...................... 1 RS-232, 3.5 mm captive screw connector,
5 pole (3 pins are used) (rear panel)
Baud rate and protocol
Control ................................ 9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through ...................... 9600 to 115200 baud
Serial control pin configurations
Pass through ...................... Captive screw connector: 1 = TX, 2 = RX,
3 = GND
Control ................................ Captive screw connector: 3 = GND, 4 = TX,
5 = RX
Mini stereo jack: tip = TX, ring = RX,
sleeve = GND
Program control ............................. Extron's control/configuration program
for Windows ®
Extron's Simple Instruction Set (SIS)
General
External power supply ................ 100 VAC to 240 VAC, 50/60 Hz, external;
to 12 VDC, 2 A max. regulated
Power input requirements ........... 12 VDC, 0.6 A
Temperature/humidity ................ Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Cooling ........................................... Convection, vents on side and top
Mounting
Rack mount ........................ Yes, with optional 1U 9.5" deep rack shelf
(RSU 129, #60-190-01; RSB 129, #60-604-01)
or 1U 6" deep rack shelf (RSU 126,
#60-190-10; RSB 126, #60-604-10)
Furniture mount ................ Yes, with optional under-desk mounting
kit (MBU 125, #70-077-01)
Enclosure type .............................. Metal
Enclosure dimensions .................. 1.7" H x 4.3" W x 6.0" D (1U high, quarter
rack wide)
4.3 cm H x 10.9 cm W x 15.2 cm D
(Depth excludes connectors)
A-5