Extron electronic FOX 2G Tx - Manual (Page 53)

FOX 2G Tx/Rx AV • Reference Information A-3
Maximum receiver sensitivity
Singlemode ......................... -18 dBm, typical
Multimode .......................... -12 dBm, typical
Optical loss budget
Singlemode ......................... 13 dB, maximum
Multimode .......................... 7 dB, maximum
Video
Gain ................................................. Unity
Standards
Input .................................... NTSC 3.58, NTSC 4.43, PAL, SECAM,
autodetected
Output ................................. NTSC 3.58, PAL (follows input vertical
rate)
Decoder type .................................. Adaptive 2D, digital comb filter
Video input — transmitters
Number/type ................................ 1 component (Y, R-Y, B-Y), S-video,
composite video
Connectors ..................................... 1 x 3 female BNC or (1) female 4-pin mini
DIN for S-video
Nominal level ................................ 1.0 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for R-Y and B-Y of component
video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p with no offset
Impedance ...................................... 75 ohms @ 5 MHz
Return loss ...................................... -30 dB for Y/VID, B-Y/C, R-Y @ 5 MHz
Input coupling ............................... AC
Video output — receivers
Number/type ................................ 1 component (Y, R-Y, B-Y) video, S-Video,
composite video
Connectors ..................................... 1 x 3 female BNC or (1) female 4-pin mini
DIN
Nominal level ................................ 1.0 Vp-p for of Y component video and
S-video, and for composite video
0.7 Vp-p for R-Y and B-Y of component
video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ 0.3 V to 1.5 Vp-p
Impedence ...................................... 75 ohms @ 5 MHz